News

How to Maintain the water well drilling rig during the run-in period

December 21 , 2021

How to Maintain the water well drilling rig during the run-in period. 1. Pay attention to the working load during the running-in period. Generally, the working load during the running-in period should not exceed 80% of the rated working load, and a suitable workload should be arranged to prevent the occurrence of overheating caused by long-term continuous operation of the machine. 2. Keep the machine clean, adjust and tighten loose parts in time to prevent the loose parts from aggravating the wear of the parts or causing the parts to be lost. 3. Pay attention to frequently check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) level and quality, and pay attention to check the seal of the whole machine. It is found that there is too much oil and water during the inspection, and the reason should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease to the lubrication point during the running-in period (except for special requirements). 4. Pay attention to frequently observe the instructions of each instrument. If there is an abnormality, stop and remove it in time. If the cause is not found and the fault is not removed, the operation should be stopped. 5. At the end of the running-in period, the machine should be subject to mandatory maintenance, inspection and adjustment should be done, and attention should be paid to the replacement of oil. The requirements for use and maintenance of water well drilling rigs during the running-in period can be summarized as: reducing load, paying attention to inspection, and strengthening lubrication. As long as you pay attention to and implement the maintenance and maintenance of the construction machinery during the running-in period as required, it will reduce the occurrence of early failures, prolong the service life, improve operating efficiency, and bring you more economic benefits.

Learn More >

What is a water well driller?

December 20 , 2021

What is a water well driller? A water well driller is a person who operate a mobile drilling rig to drill and monitor groundwater wells for residential, commercial, industrial, and agricultural uses, most often when there is no readily available surface water. The types of drilling methods are rotary, DHT hammer. If the ground is especially hard, you may need to use DTH hammer. After you drill the well in the earth, your duties include installing a pump, sterilizing the system to prevent bacterial growth, and starting the water flow. In some more extensive operations, you manage a small crew of workers. You keep records of each well, and in most states, you provide the government with copies of these records.

Learn More >

Water well drilling rig machine Engine starter usage and maintaining

December 13 , 2021

Water well drilling rig machine Engine starter usage and maintaining The starter is generally composed of three parts: a DC motor, a transmission mechanism and an electromagnetic operating mechanism. The correct use and maintenance methods of the starter, in order to extend the life of the starter, and ensure that it can work quickly, reliably, and safely, the correct use and maintenance requirements for the starter of the water well drilling rig are as follows

Learn More >

Trailer water well drilling rig

December 11 , 2021

Trailer water well drilling rig The most dynamic and powerful rigs is the trailer mounted hydraulic water well drilling rig. Hydraulic power boosts performance and accelerates productivity, while the trailer design is portable. Capable of drilling 150mm boreholes up to 130m, this meets the demanding of water well projects and other applications in a variety of soil and rock conditions. Small Water Well Drilling Machine is a Trailer mounted small water well drilling machine which uses advanced hydraulic technology, top head driving, and it can work with both mud pump and air compressor. This well drilling rig is compact, fully hydraulic, for down-the-hole hammer and rotary drilling up to 120 meters. It has the characters of lightweight, high efficiency, and powerful multi-function. This Small Water Well Drilling Machine can be your most economical and practical choice!

Learn More >

Core Drill Bit

December 06 , 2021

Core Drill Bit The core drill bit breaks the bottom hole rock with a ring structure to drill the core, thereby forming a core pillar in the center. The core harvest rate and the speed of drilling are all related to the quality and selection of the drill bit. The structure design of the core bit should be conducive to improving the core harvest rate. The bit should be drilled smoothly to avoid vibration and damage to the core. Outer edge of the bit and the center of the borehole should be concentric. And inner cavity of the drill bit should be able to make the core claws as close as possible to the core entrance, so that the core can enter the core barrel through the core claws and be protected soon after it is formed, at the same time, it can be as close as possible to the core root when cutting the core , to reduce the residual core at the bottom of the well. According to different formations, the commonly used core bits for water well drilling rigs are divided into steel core bits, scraper core bits and diamond core bits.

Learn More >

HZ Series Hydraulic Core Drilling Rigs

November 29 , 2021

HZ Series Hydraulic Core Drilling Rigs The HZ series hydraulic core drilling rig is a portable drilling rig， also have a wide range of uses. It is suitable for geological survey of railways, water conservancy, bridges, dam foundations and other buildings, geological core drilling, small grouting holes, blasting holes, and water well drilling. Diamond drill bits, PDC drill bit and alloys drill bit can be used for drilling according to different formations. 1. With hydraulic automatic feed mechanism, it can improve drilling efficiency and reduce the labor intensity. 2. The ball clamp clamping mechanism is used to instead of the chuck, which can work by non-stop inverting rod, not only very convenient to operate,but also safe and reliable. 3. It equipped with a pressure gauge at the bottom of the hole, make it convenient for grasping the drilling situation in the hole. 4. It has a compact structure, centralized handle, small footprint, light weight, also easy to disassemble , and easy to move. So it is more suitable for plain area or mountainous areas operations. 5.Compare to the DTH Drilling, and Circulation drill, the UNIQUE brand HZ series Hydraulic core drilling rig is much smaller and cheaper, more suitable for small projects , and private works, reduce the economic burden.

Learn More >