Case

A UNIQUEMAC UYX120 core drilling rig has completed loading and is now set for shipment to Peru. The container photos show the core drilling rig together with its supporting drill rods, prepared and fixed for the long journey. This shipment reflects UNIQUEMAC’s capability in core drilling rig manufacturing, equipment preparation, and international transport. In this article, we walk through how the UYX120 was prepared and loaded, look at the key features that make this core drilling equipment a practical choice, and explain what buyers should consider when selecting a core drilling rig for their own projects.

UYX120 Core Drilling Rig Prepared for Shipment to Peru

Equipment Preparation Before Shipping

Before the container was sealed, the UYX120 went through a series of preparation steps focused on readiness and safe transport. The rig received an overall inspection to confirm its structure and working condition. Hydraulic hoses and key connection points were checked to reduce the chance of loose fittings or leaks during transport and at first use on site. The supporting drill rods were organized and counted so the shipment matched the packing list. After equipment and accessories were confirmed, the loading plan was arranged for the container. Securing and protection measures were applied for the long sea journey, with the machine and rods held firmly in place to prevent movement in transit. These are the practical steps carried out for this shipment.

Loading the Core Drilling Rig and Drill Rods

The container photos show the actual loading state of the UYX120 core drilling rig and its drill rods. The machine and its supporting materials were placed in a deliberate arrangement, which helps keep them stable during transport and makes better use of the available container space. These original loading photos give buyers a direct view of how the equipment and drill rods were positioned before the container doors were closed.

Key Features of the UNIQUEMAC UYX120 Core Drilling Rig

Compact Drilling Equipment Design

The UYX120 is arranged as a compact core drilling rig, as shown in the machine photos. The compact layout means the rig can be positioned and operated in a limited workspace, which is useful on job sites where space is tight. The frame and component arrangement are organized to keep the machine manageable for transport and for site setup. This design focus is about practical use in the field rather than general claims.

Hydraulic Drilling System

The UYX120 uses a hydraulic drilling system. Hydraulic operation supports drilling feed, power transmission, and equipment control during the drilling process. This type of drilling control gives the operator direct command over the drilling action, which supports consistent core drilling work. The hydraulic configuration is part of the equipment setup that makes the rig suited to a range of geological drilling tasks. For the exact specification of the hydraulic system, refer to the UNIQUEMAC product documentation.

Core Drilling for Geological Investigation

A core drilling rig is used to drill into the ground and retrieve cylindrical rock samples called cores. The UYX120 is built for this kind of work, supporting geological investigation, rock layer study, and core sample collection. Core drilling helps projects obtain rock samples from depth, providing material for later geological analysis. Specific technical parameters such as drilling depth, hole diameter, and core size should be confirmed with UNIQUEMAC product documentation before project planning.

What Is a Core Drilling Rig Used For?

Geological Exploration

In geological exploration, a core drilling rig is used to obtain underground rock samples. These samples help geologists understand the composition and structure of the rock layers they are studying.

Mineral Exploration

In mineral exploration, core samples provide material for assessing what lies beneath the ground. The capability of a core drilling rig in mineral work depends on the equipment configuration, drill tooling, ground conditions, and the requirements of the specific project.

Engineering and Geotechnical Investigation

In engineering and geotechnical investigation, core sampling is used to study rock layer characteristics and assess geological conditions for planned works. This supports decisions on site suitability and ground treatment. This section is not a full geology course, but it helps buyers understand where a core drilling rig adds value to a project.

What Should Buyers Consider When Choosing a Core Drilling Rig?

Required Drilling Depth

Your target drilling depth influences both the rig selection and the drill tooling configuration. A rig matched to the depth range of your project avoids limits on site and unnecessary cost.

Rock Formation and Ground Conditions

Different rock formations and ground conditions affect the drilling method, drill bit selection, and equipment setup. Hard rock, soft formations, and mixed ground each call for a different approach.

Core Diameter and Sampling Requirements

The core diameter and sampling requirements should be set according to the project objective. Larger cores give more material for analysis, while the required diameter affects the drill tooling choice.

Drill Rods and Supporting Equipment

Confirm the drill rod specification, connection type, tooling configuration, and related accessories so everything is compatible with the rig. Choosing a suitable core drilling rig starts with understanding the project’s drilling depth, geological conditions, and core sampling requirements.

Supplying Core Drilling Equipment to Peru and International Markets

UNIQUEMAC manufactures and exports drilling equipment to international markets, including the core drilling rigs shipped to Peru. As a core drilling rig manufacturer and core drilling equipment supplier, the company offers core drilling rigs and other drilling equipment for different project needs. Buyers can discuss target drilling depth, hole specification, and supporting drill tooling with the team. This UYX120 shipment to Peru is a real example of UNIQUEMAC’s export work, from manufacturing and preparation to loading and transport.

Frequently Asked Questions About Core Drilling Rigs

What Is a Core Drilling Rig Used For?

A core drilling rig is used to drill into the ground and retrieve core samples. It is common in geological surveys, mineral exploration, and some engineering geotechnical projects.

How Do I Choose the Right Core Drilling Rig?

Start with your target drilling depth, ground conditions, core sampling requirements, drill rod specification, and overall equipment configuration. These points define the range of suitable rigs for your project.

What Equipment Is Needed for Core Drilling?

Core drilling typically needs the rig, drill rods, drill bits, and other supporting equipment, depending on the drilling method and site conditions.

Can UNIQUEMAC Recommend a Core Drilling Rig for My Project?

Yes. If you provide your target drilling depth, ground conditions, core diameter, and project purpose, UNIQUEMAC can discuss a suitable equipment solution based on those details.

Contact UNIQUEMAC for Core Drilling Equipment

If you are considering a UYX120 core drilling rig or other core drilling equipment, contact UNIQUEMAC with your target drilling depth and ground conditions. Our team can help match the right configuration for your project. Visit the UNIQUEMAC website for official contact details and more equipment options.